Fuel Tank Fixing & Fuel Lines

Fixed the fuel tank today, the norm seems to be sikaflex so I made sure I used plenty.  Not the neatest of jobs but thought it was better to use too much glue than not enough, this part isn't going to be seen and better safe than sorry:

Not really much to say.  Used my rathchet strap to clamp down and then a couple of bits of tubing either side to stop it sliding back.

I guessed where to put the fuel lines but I've noticed there is a guide on the KitSpares site, I am not far off to be honest I just routed both pipes down the right hand side of the diff and split from there, rather than top of diff.  I was worried about some kind of weird gravity affect for the top pipe (back from swirl pot), I ran the pipe along the bottom of the fuel tank and then back up to the top, which is exactly the same as KitSpares.

 I have the two inside crescent panels now.  I plan on fitting them, finishing my callipers off and then I am going to have to purchase the wiring loom as I don't see how I can get the rear end on without fitting the wiring as it will be a squeeze.